Resolved Issues - Quantum Scalar i500 Release Notes

Resolved Issues

Change Service
Request Request
Number Number
18838 SR 800352,
SR 804000
18854 SR 800352
19702
19774
19804
19901
This release of Scalar i500® i4 (520G.GS003) firmware resolved the following
issues.
The screen saver may not come up on the library after a reboot following
Issue:
setting the date and time on the operator panel.
Fixed - screen saver now comes up.
Resolution:
The library is unable to send e-mail to the SMTP server if the library's internal
Issue:
network matches SMTP server's network.
An error dialog now appears alerting you to the issue.
Resolution:
Possible robot handling problems in 32U configurations with the control
Issue:
module on top.
Fixed.
Resolution:
7404 Fibre Channel blade Host Mapping/Management settings were not
Issue:
restored via the restore configuration feature (
Restore System Configuration
Fixed - settings are now restored.
Resolution:
FC I/O blade will not boot when downgrading firmware from version
Issue:
500G.GS002 to 400G.GS010.
Fixed. Downgrading firmware works correctly.
Resolution:
HP LTO-4 Fibre Channel tape drive lost communication during drive
Issue:
firmware upgrade from H37Z to H44Z through the FC I/O blade. The upgrade
succeeded, but RAS ticket indicates that it failed.
Fixed. Ticket is no longer reported.
Resolution:
Resolved Issues
Description
Tools > Save/Restore Configuration >
).
Release Notes
Document 6-01378-10 Rev A
October 2008
0
5