Advertisement
Compatibility Matrix
Use the following tables for system compatibility. Tests have shown that the components listed below
interoperate effectively when properly configured. Visit
matrix.
Table 1
Compatibility Matrix
Configuration
Model
SNC 4501
Scalar 24
SNC 4501
Scalar 24
SNC 4500
Scalar 100
SNC 4500
Scalar 100
1. CA ARCserve Version 9.01 requires patches through QO51045.
2. Veritas Backup Exec Version 9.1, and patches 267180, 267250, 267682, 265501. Veritas recommends patch 268600 if
Intelligent Disaster Recovery (IDR) is used.
3. Use the following code levels: HBA driver, 1.20.0.39; HBA Firmware, 1.20.41; HBA BIOS,1.2.40.
4. A host that uses this HBA with Veritas Backup Exec must first be attached to a Gigabit Ethernet switch before being connected
to the SNC 450x. Otherwise, the software erroneously recognizes the media changer as offline.
Known Issues
Advisements pertaining to the latest release of SNC 450x Firmware v. 2.16 are as follows.
Table 2
Known Issues
Change
Request
Number
PR00212
If the management port (mp) experiences
excessive traffic, for example a Denial of Service
(DoS) attack, the CPU cycles required to service
this increase in traffic can impact performance.
PR00223
The SNC 4500 cannot download library firmware.
2
Tape Library
Server
Tape
Platform
Drives
SCSI LTO-2
Win2003
Win2000
SDLT-320
Win2003
Win2000
SCSI LTO-2
Win2003
Win2000
SDLT-320
Win2003
Win2000
Description
www.adic.com
for the most current version of this
Host
ISV Application
Make/Model
CA ARCserve 9.01 or 11.1
Veritas Backup Exec
BakBone Netvault 7.1
Commvault Galaxy 5.0
Legato Networker 7.1.2
CA ARCserve 11.1
CA ARCserve 9.01 or 11.1
Veritas Backup Exec
BakBone Netvault 7.1
Commvault Galaxy 5.0
Legato Networker 7.1.2
CA ARCserve 11.1
Limit mp exposure to external
network traffic.
Use the library serial port or RMU
to load library firmware.
GbE HBA
Make
1,2
3
4
,
Model
1 Gb
Adaptec 7211C
TM
1 Gb
Adaptec 7211C
1Gb
Adaptec 7211C
1Gb
Adaptec 7211C
Workaround
© January 2005, ADIC
Advertisement
