Quantum Scalar 1000 Reference Manual page 295

Table 41 ROBAR Commands (Continued)
Command
KEC
LJB
MAN
MO
MOCL
MV
ROPO
ROSA
ROSO
SCH
SIN
SIVK
SWIT
UJB
ULC
ULK
ULU
ULV
UPC
UPK
UPV
VI
VICC
The configuration of clean pools and insert/eject areas should be executed via the Scalar
Note
DLC Management GUI. Refer to
110
Scalar DLC Reference Guide
Moves a cartridge from drive to a given position.
Moves a cartridge to the I/O area of a integrated Jukebox.
Switches from automatic mode to the manual or test mode.
Moves a cartridge to a drive from archive or the Insert/Eject unit.
Initiates a drive cleaning.
Moves a cartridge from archive or Insert/Eject unit to a coordinate in the
archive or insert/eject unit.
Moves the robot to the given coordinate.
Displays and change the library status to online.
Moves the robot to a park position and set the status to not ready.
Sends the information of the first occupied compartment to the requester.
Stops the running insert command.
Stops the running inventory command.
Toggles the library status passive-active.
Unloads the I/O unit of a integrated Jukebox.
Displays a archive catalog entry by a given coordinate.
Displays a archive catalog entry by a given coordinate.
Performs the robot to press button(s) on the drive.
Displays a archive catalog entry by a given volser.
Changes the archive catalog entry by a given coordinate.
Changes the archive catalog entry by a given coordinate.
Changes the archive catalog entry by a given volser.
Inserts the first available Cartridge in the Insert area to the archive.
Inserts the cartridge from a given coordinate to a given target coordinate.
Description
Create Pool on page 109 and Create Mailbox on page
279