Quantum Scalar 1000 Reference Manual page 130

Field/Button
Command queue
a
execution
Number of storage
Number of I/E slots
Number of drives
Number of cartridges
Remove
Add new Partition
Freeze
Activate
Reset Alarm flag
Refresh Alarm flag
Help
a. The Freeze command queue execution feature currently is implemented for the Scalar 10K DA libraries only.
If the physical library properties are changed (for example, another drive
CAUTION
added), the Scan SCSI Bus operation does not update the existing library
properties. The update can be done only by the Teach command from the
device operator panel.
When new drive(s) and/or insert/eject slot(s) have been added to the physical
CAUTION
library that already contains a working configuration (logical library, clients,
etc.), the admin must check whether the configuration of partitions is still
correct. Refer to
The operation of assign-unassign partitions may be required. Refer to
Partition
If the physical library is removed, all partitions, media rules, and offline
CAUTION
cartridges are lost. Library delete confirmation is required.
114
Icon Operation
Supplied
Supplied
Supplied
Supplied Number of available drives.
Supplied Number of available cartridges.
Click
Click Add new partition. Refer to
Click
Click
Click Remove Alarm flag (active only when the library is in
Click
Click
Partition on page 119.
on page 108 and Assign Partitions
Description
Activated means commands should be executed when
they arrive to the physical library.
Frozen means commands should be executed only
after the library will be activated again.
Number of available storage slots.
Number of available mailbox slots.
Remove the physical library.
127.
Freeze command queue execution.
Activate command queue execution (after freeze).
Alarm state).
Refresh Management GUI for Alarm.
Open online help for the current pane.
on page 38.
Create Partition on page
Assign
Configuration Tab