Port; Figure 116 Port: Scsi - Quantum Scalar 1000 Reference Manual

Port

In the Select Components area of the pane, selectable Ports appear. Clicking the expand/collapse button
will result in an element expansion.
The SCSI ports cannot be configured by means of the Scalar DLC Management GUI
Note
because they are built-in external system objects. The Scalar DLC software can only use
them or indicate that the port is not usable.
The operation of enable/disable the Port is executed by means of the SCSI Target Port Tool. Refer to
Target Port Tool on page 217.

Figure 116 Port: SCSI

Field/Button Icon
Port ID
Name
State
Number of
targets
Max number
of targets
164
Operation
Supplied The port ID.
Supplied The port unique name.
Supplied The port state. See
Supplied The number of targets currently configured for the SCSI port.
Supplied The maximum number of targets that can be configured for the
SCSI port. Refer to
Description
Table 22 on page 162.
Table 23 on page 163.
SCSI
Configuration Tab