Quantum Scalar 1000 Reference Manual page 102

Field/Button Icon
Name
Element Type
Current volser
Import
Export
Mount
Dismount
Move
Help
By default, the drives are sorted by element type, in ascending order. Clicking on the appropriate column
title will change the sorting order.
To select drive for the operation, click on it. <Ctrl>+Click allows multiple drive selection, for the multiple
Export operations. Multiple Dismount/Move operations are not allowed in the Scalar DLC Management
GUI.
86
Operation
Select The drive name. An icon also indicates the drive state. See
Table 16
Select A drive type. Refer to
Select If the drive is occupied, a contained cartridge is shown. For the
optical disk two cartridges are shown, active side first.
Click Disabled for a drive.
Click Transfer the cartridge to a mailbox. If more than one mailbox
exists, an additional export selection appears. See
on page 77. The user selects the appropriate mailbox from the
combo box. This operation saves the cartridge home position.
The button is enabled when a mailbox exists.
Click Disabled for a drive.
Click Move a cartridge from a tape drive to the cartridge home
position.
This button is enabled for a mounted cartridge.
Click Open a pop-up Move window. Refer to
Element
The move operation transfers a cartridge from its current
position to a selected destination slot.
Click Open online help for the current pane.
Description
on page 67.
Drive Types
on page 80.
on page 249.
Figure 55
Move Cartridge to
Library Tab