Quantum Scalar 1000 Reference Manual page 257

Table 28 Terms (Continued)
Term
Event notification
Event rule
Export
FC
Fibre Channel
Generic Mount
GUI log
HCC/MVS
Home position
I/O unit
Import
Insert
Insert/eject area
Insert/eject slot
Interface adapter
Library
Library log
Linear shelve
Linear storage
Scalar DLC Reference Guide
When the specific event has occurred, the Scalar DLC can sent an appropriate
message to the customer via email or Management GUI. The message format
depends on the appropriate Event rule.
A pre-defined pattern that selects the specific event from all actions that have
occurred. It can also send a notification to the specified destination. See also
Event and Event notification.
Same as Eject.
Same as Fibre Channel.
An optical connection operating with the SCSI protocol. Currently has the
largest carrying capacity among all other interfaces and virtually no distance
limitations. Also refer to SCSI.
The operation of loading a single cartridge into the first free drive of the
appropriate type. Also refer to Mount.
The list of notification messages visible to all users who are currently logged on
the Management GUI. No archive available.
Also called HACC/MVS. Host (Automatic) Control Component / Multiple Virtual
Storage. Some installations use this software solution on MVS platforms in
addition to the ROBAR client.
The slot (typically a storage slot) where the cartridge will be automatically
returned after Insert and Dismount commands are executed.
Input/Output unit. The device that contains a pack of insert/eject slots which
can be accessed from outside the library only as a single unit. The physical
library usually contain several I/O units.
Same as Insert.
The operation that moves the cartridge(s) from the insert/eject area to the
storage area. Each cartridge is placed into the home position.
All available insert/eject (mailbox) slots in the library.
The slot that serves as a temporary storage for a cartridge that should be either
placed into the library (insert operation) or removed from it (eject operation).
Same as Adapter.
1 Refer to Logical library.
2 Refer to Physical library.
Refer to Command log and Error log.
Same as Linear storage.
A device that consists of storage slots. If the library is dual-aisle, each linear
storage device can be accessed by one robot only.
Explanation
241