Quantum Scalar 1000 Reference Manual page 183

For the details of the SCSI command format, refer to:
• SCSI Reference Manual for the Scalar 10K library.
• SCSI Reference Manual for the Scalar 1000 library.
The newly created target already contains LUN 0. If the other LUNs are required, they
Note
should be created manually.
When the SCSI Target is removed, all SCSI Clients configured for LUNs of this
CAUTION
target are removed as well.
The Target can operate either in SCSI-2 or in SCSI-3 mode. All the LUNs of this target will work in this mode
as well, and this will be the standard for all clients assigned to these LUNs. For the details of the SCSI Mode
refer to:
• SCSI Primary Commands 2 (SPC-2) Manual
• SCSI Primary Commands 3 (SPC-3) Manual
Because of interface properties, one and only one SCSI Client can be assigned to the
Note
single LUN.
After the client is assigned to the LUN 0 of any target, all other clients
CAUTION
assigned to the non-zero LUNs of this target are activated.
Scalar DLC Reference Guide 167