Quantum Scalar 1000 Reference Manual page 121

Field/Button
Robot2 coordinate
LSCI coordinate
Current cartridge
State
Number of mounts
Time (ms)
Clean pool
Automatic cleaning
Max Use
Dismount
management
Delay (ms)
Loops
Owner
Exclusive reservation
Update
Reset Alarm flag
Refresh Alarm flag
Help
If the DAS interface is being used, the drives are to be named according to the DAS
Note
standards. ADIC recommends using names no more than 9 alphanumeric characters
long and beginning with a letter.
Scalar DLC Reference Guide
Icon Operation
Supplied
Supplied
Supplied
Supplied
Supplied
Enter
Select
Check
Supplied
Check
Supplied
Supplied
Select
Supplied
Click
Click
Click
Click
Description
The drive coordinate in Robot2 (None means the slot
is assigned to another robot). Refer to
Addressing on page 244
Drive LCSI coordinate. Refer to
on page 244.
A cartridge contained in the slot, if any.
Drive state (empty/occupied).
A total number of mounts executed into the drive.
The cleaning time for the drive.
A pool that is used by clean manager to get the
cleaning cartridges.
Configure auto-cleaning. If checked, the Max Use field
is editable.
Shows how long the drive could be used without
cleaning (number of mounts between cleanings).
Configure the dismount manager. If checked, the
Delay and Loops fields are editable.
A time the drive requires to unload the cartridge.
Number of retries if the drive does not unload the
cartridge.
A slot owner (client). The reserved slot can be used
only by its owner.
None means the slot is not reserved.
The reservation may be either normal (another owner
can un-reserve the slot) or exclusive (only the owner
can change the reservation).
Save the slot properties after edit.
Remove Alarm flag (active only when the slot is in
Alarm state).
Refresh Management GUI for Alarm.
Open online help for the current pane.
Element
Element Addressing
105