Quantum Scalar 1000 Reference Manual page 161

Field/Button
Client Host Name
Respond When Eject
Area Full
Dismount Before
Mount
Supervisor
Check I/E Area
Names
Avoid Media Identifier
Contention
Requires Drive
Allocation
Priority
Sequence
Wait insert before
mount
Command pause
Drive pause
Scalar DLC Reference Guide
Icon Operation
Enter
Check
Do not check
Do not check
Do not check
Check
Do not check
Select
Do not check
Do not check
Do not check
Do not check
Description
The host name of the computer running the client
software. ADIC recommends using the following:
• client host IP address
• client host DNS name, short
• client host DNS name, full
• localhost for the client operating from local host
(possible but not recommended because of security
reasons)
• any for the client operating from any host (possible
but not recommended because of security reasons)
Scalar DLC software returns an error (Area Full) if the
client tries to eject a cartridge into an eject area with
no free slots.
Scalar DLC software does not execute a dismount
when a client tries to mount a cartridge into an
occupied drive.
A client without the supervisor rights is not authorized
to use drives and/or cartridges that are reserved by
another client.
The I/E (mailbox) area names that can be used by the
client are not limited with the DAS naming standard.
Cartridge media identifiers are shown only as a result
of executing a cartridge information operation.
A client does not need to reserve the drive before
executing a mount or dismount.
Low means the client-sent commands have the lowest
priority in a queue. Refer to
Medium means the client-sent commands have the
standard priority in a queue. Refer to
page 174.
High means the client-sent commands have the
highest priority in a queue. Refer to
page 174.
A commands sent by client without sequence option
will be executed as they're ready. The system will not
wait until the previous client command is finished.
A client without wait insert option cannot wait until the
ejected cartridge will be inserted for the mount could
be executed.
A client without command pause rights is not
authorized to execute "pausedas" DAS command.
A client without drive pause rights is not authorized to
execute "pausedrive" DAS command.
Queue Tab on page 174.
Queue Tab on
Queue Tab on
145