Robar Commands; Table 41 Robar Commands - Quantum Scalar 1000 Reference Manual

Example1 (for DOS or Windows-based system):
C:>\ Set PORT = 1010
C:>\ Set HOST = computer
Example2 (for Unix-like systems):
#PORT = 1010 export PORT
#HOST = computer export HOST
Step 6 If the customer uses HCC/MVS, this also must be configured in the ROBAR client settings.
Refer to ROBAR Client
Now, the Scalar DLC software is ready to accept commands from ROBAR Client.

ROBAR Commands

Table 41 ROBAR Commands
Command
ACOM
AOFF
AUTO
BOF
BON
CLM
CLU
DL
EJ
EJT
EJTC
FLIP
IN
INC
INSC
INV
IVK
IVV
KE
278
on page 158.
Checks the communication to the Scalar DLC software and get information
about the library status.
Programs end of the Scalar DLC software.
Switches from manual or test mode to the automatic mode.
Switches the barcode reading for the sending host off.
Switches the barcode reading for the sending host on.
Clean manager status and configuration command.
Closes the flap on a drive.
Changes a archive catalog entry.
Ejects data cartridges - temporary.
Ejects data cartridges - complete.
Ejects complete - used cleaning cartridges.
Toggles the side of a Optical Disk in an Optical Disk drive.
Inserts data cartridges by a logical range.
Verifies the archive with the database by a given coordinate.
Inserts clean cartridges by a logical range.
Inventory of a given volser.
Inventory of a given coordinate range.
Inventory of a given volser.
Moves a cartridge from drive to the home position.
Description
ROBAR Guide