Defining The Library Power-Up State - Quantum ATL 7100 Operator's Manual

Defining the
Library Power-Up
2
State
The condition of the library after power-up, self-tests and
initialization can be defined as either On-line or standby (Off-line).
The default is On-line.
To change the power-up state:
Enter the menu mode.
1
Press the
2 SELECT
and verify the following is displayed in the SDA:
Use the button to bypass the Inquiry menu and verify the
3
following is displayed in the SDA:
Press the
4 SELECT
and verify the following is displayed in the SDA:
System On-line is the default. If you want to change
Note:
the power-up state to standby, proceed to step 5.
Otherwise, exit the menu mode.
Use the button to bypass the System On-line option and
5
verify the following is displayed in the SDA:
With the desired option displayed on line 2, press the
6
button.
Exit the menu mode.
7
Quantum|ATL 7100 Series Library Operator's Guide
Chapter 2 Operating the Library
Using the Control Panel Menus
button to choose the Configuration menu
Menu:Configuration
Inquiry
Menu:Configuration
Power-Up State
button to choose the Power-Up State menu
Menu:Power-Up State
On-line<
Menu:Power-Up State
Standby<
SELECT
33