Table of Contents
Advertisement
www.ti.com
4 EVM Cable Assemblies
This evaluation module uses Huber+Suhner
To inquire about purchasing cable assemblies from Huber+Suhner, contact:
Info.us@hubersuhner.com
HUBER+SUHNER Inc.
8530 Steele Creek Place Drive, Suite H
Charlotte-NC- 28273
+1 704-790-7300
There are three part numbers that TI suggests using with this EVM:
1. 85014420, MF53/1x8A_21MXP/21SMA/152: MXP-15 cable assembly. This is a lower cost cable assembly
compared to the MXP-40, but the SI performance is very good and more than adequate for 25 Gbps
operation.
2. 84099607, MF53/1x8A_21MXP/11SK/305: MXP-40 cable assembly. This cable assembly is designed
specifically for 40+ GHz. It features a male cable end and longer cable length options.
3. 84098900, MF53/1x8A_21MXP/21SK_ergo/305: MXP-40 cable assembly. This cable assembly is designed
specifically for 40+ GHz. It features a female cable end and longer cable length options.
SNLU324 – MARCH 2023
Submit Document Feedback
™
1 × 8 MXP cable assemblies.
Figure 4-1. Huber+Suhner MXP Cable Assemblies
Copyright © 2023 Texas Instruments Incorporated
EVM Cable Assemblies
DS560DF410EVM User's Guide
15
Advertisement
Table of Contents
Need help?
Do you have a question about the DS560DF410EVM and is the answer not in the manual?