Table of Contents
Advertisement
Quick Start Guide
GFK-3000B
3.1 Connect Input Power to Energy Pack
IMPORTANT
Before connecting input power, see complete installation instructions in the
PACSystems Controllers: Battery and Energy Pack Manual, GFK-2741E or later.
You will need:
•
A 24Vdc, 72W SELV power supply
•
A power cord with 18 AWG (0.82mm
•
An 18 AWG (0.82mm
•
An input power terminal block – provided (Weidmuller part number
1748010000)
•
A small flat-head screwdriver (such as a 1.4mm jeweler's screwdriver)
Using the power cord, connect the power supply output to the Energy Pack's
1.
input power terminal block.
To insert the wires in the power terminal block connector, you may need to
use the small screwdriver to release the spring clamp on the terminal block.
Recommended wire stripping length is 7mm (0.28 in).
Cable Connections
2
) copper wires
2
) copper wire for frame ground
Chapter 3
Sep 2019
7
Advertisement
Table of Contents
