Quick Start Guide
GFK-3000B
Figure 3.2: Energy Pack Input Power Mating Connector (bottom view)
Insert the plug into the Energy Pack's Input Power connector and securely
2.
tighten the attaching screws.
3.
3.2
Connecting the Energy Pack to the Controller
With power to the system turned off, use the supplied cable (IC695CBL003)
to connect the output of the Energy Pack (green connector) to the 24Vdc
input on the Controller (3-pin green connector) and to the serial
communication link (using the 5-pin green connector). Refer to
Cable Connections
Chapter 3
Sep 2019
.
Figure 4.1
8