Ubiquiti UAP-AC-HD Quick Start Manual page 20

Powering the UniFi AP
The UAP-AC-HD features auto-sensing 802.3at PoE+ support
and can be powered by any of the following:
• Ubiquiti Networks UniFi Switch with 802.3at PoE+
• 802.3at PoE+ compliant switch
• Ubiquiti Networks Gigabit PoE Adapter (48V, 0.5A)
The single-pack of the UAP-AC-HD includes one Gigabit PoE
adapter. For multi-pack units, PoE adapters or a UniFi Switch
with 802.3at PoE+ may be purchased separately.
Connecting to a PoE+ Switch
Connect the Ethernet cable from the UniFi AP directly to a
PoE+ port on the switch.
IMPORTANT:
US-8 or US-8-60W; however, it can be powered by other
UniFi PoE Switches that provide 802.3at PoE+ power.
The UAP-AC-HD cannot be powered by the