Fuji Xerox DocuPrint M385 z User Manual page 611

Level 1
*1
Parts Life
*1
Life is approximate and may vary by type of use.
*2 Available if the Tray Module(s) (Optional) is installed.
[All Settings] > [Initial Setup]
Level 1
Date & Time
Station ID
Tone/Pulse
(Not available in New
Zealand)
Dial Tone
Dial Prefix
Compatibility
Reset
Local Language
(Available only for some
countries)
Level 2 Descriptions
Display the remaining life of the drum cartridge.
Drum
Display the remaining life of the fusing unit.
Fuser
Display the remaining life of the laser unit.
Laser Unit
Display the remaining life of the PF kit MP.
PF Kit MP
Display the remaining life of the PF Kit 1.
PF Kit 1
Display the remaining life of the PF Kit 2.
*2
PF Kit 2
Display the remaining life of the PF Kit 3.
*2
PF Kit 3
Level 2
Date
Time
Auto Daylight
(For Taiwan and
Australia)
Time Zone
Fax
Tel
Name
-
-
-
-
Machine Reset
Network
Address Book & Fax
All Settings
Factory Reset
-
Descriptions
Add the date and time on the screen and in the headings of the
faxes you send.
Set the machine to change automatically for Daylight Saving
Time.
Set your time zone.
Enter your name and fax number so it appears on each page
you fax.
Select the dialling mode.
Shorten the dial tone detect pause.
Set a prefix number to always be added before the fax number
every time you dial.
Adjust the equalisation for transmission difficulties.
VoIP service providers offer fax support using various
standards. If you regularly experience fax transmission errors,
select Basic (for VoIP).
Restore all the machine settings that you have changed, such
as Date and Time.
Restore all network settings back to the factory settings.
Erase all stored phone numbers and fax settings.
Restore all the machine's settings back to the factory settings.
Restore all settings back to the factory settings.
Change your LCD language.
611