Fuji Xerox DocuPrint M385 z User Manual page 318

Home > Network > Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network
Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n)
Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID
Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using
an Existing SSID
Related Models: DocuPrint M385 z/DocuPrint M375 z
If you are trying to pair your Fuji Xerox machine to a computer that is already in Ad-Hoc mode and has a
configured SSID, use these instructions.
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
1. Check and record the current wireless network settings of the computer to which you are connecting.
The wireless network settings of the computer you are connecting with must be set to Ad-Hoc mode with an
SSID already configured. For more information on how to configure your computer in Ad-Hoc mode, see the
instructions included with your computer or contact your network administrator.
Network Name (SSID)
Communication Mode
Ad-Hoc
For example:
Network Name (SSID)
HELLO
Communication Mode
Ad-Hoc
Your Fuji Xerox machine supports the use of the first WEP key only.
2. Press [ ] [Settings] > [All Settings] > [Network] > [WLAN] > [Setup Wizard].
3. When [Enable WLAN?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
4. The machine will search for your network and display a list of available SSIDs. If a list of SSIDs is displayed,
swipe up or down or press ▲ or ▼ to display the SSID to which you want to connect, and then press the SSID.
5. Press [OK].
6. Enter the WEP key, and then press [OK].
• Your Fuji Xerox machine supports the use of the first WEP key only.
7. The machine attempts to connect to the wireless device you have selected.
Encryption Mode
NONE
WEP
Encryption Mode
WEP
> Configure Your
Network Key
-
Network Key
12345
>
318