Table of Contents
Advertisement
Error Message
Out of Fax Memory
Out of Memory
Output Tray Full
Paper Low
Paper Low T1
Paper Low T2
Paper Low T3
Print Data Full
Print Unable ##
Received Fax ##
Replace Toner
Cause
The machine's fax memory is
full.
The machine's memory is full.
The output paper tray is full.
The paper tray is nearly empty.
The machine's memory is full.
The machine has a mechanical
problem.
An unprinted received fax is
waiting to print on the correct
size paper.
The toner cartridge is at the
end of its life. The machine
stops all print operations.
While memory is available,
faxes are stored in the memory.
Action
If you are using Fax Preview function, delete
unwanted received fax data.
If you are using Memory Receive function and
are not using fax preview function, print received
fax data. To print fax data, press
Settings > All Settings > Fax >
Print Document.
If a fax-sending or copy operation is in
process
Do one of the following:
•
Press Send Now to send the pages scanned
so far.
•
Press Partial Print to copy the pages
scanned so far.
•
Press Quit or
and wait until the other
operations that are in progress finish, and
then try again.
If a scan operation is in process
•
Split the document into multiple parts.
•
Reduce the Resolution.
•
Reduce the File Size.
•
Select the high compression PDF file type.
•
Clear faxes from the memory.
If a print operation is in process
Press
and reduce the print resolution.
Remove printed paper from output tray indicated
on the LCD.
Refill the paper in the paper tray indicated on the
LCD.
Press
and delete the previously stored
secure print data.
•
Press and hold
to turn the machine off,
wait a few minutes, and then turn it on again.
•
If the problem continues, contact Fuji Xerox
customer service.
To print the received fax, load the correct size of
paper in the tray indicated on the LCD. Paper
sizes available for fax printing are A4, Letter,
Legal, Folio, Mexico Legal and India Legal.
Replace the toner cartridge with a new one.
500
Advertisement
Table of Contents
