Fuji Xerox DocuPrint M385 z User Manual page 603

Level 1 Level 2
Tray Setting Check Size
Tray Use: Copy
Tray Use: Fax
Tray Use: Print
Skip Tray
Separator Tray
Volume Ring
Beep
Speaker
LCD Settings Backlight
Dim Timer
Screen Home Screen
Settings
Copy Screen
Scan Screen
Display
Information
Ecology Toner Save
Sleep Time
Quiet Mode
Auto Power Off
Setting Lock Set Password
Lock OffOn
Interface Fixed Port
Delete Macro ID
Storage
Font ID
Format
*1 Available if the Tray Module(s) (Optional) is installed.
[All Settings] > [Shortcut Settings]
Level 1
(Select shortcut button)
Level 3
-
-
-
-
-
*1
-
*1
-
-
-
-
-
-
-
-
Date & Time
IP Address
-
-
-
-
-
-
On
Off
Macro ID XX
Font ID XX
-
Level 2 Descriptions
Change the shortcut name.
Rename
Change the shortcut settings.
Edit
Delete the shortcut.
Delete
Descriptions
Select whether to display a message telling you to
check that the size of the paper in the machine and
the machine's Paper Size setting match.
Select the tray to be used for Copy.
Select the tray to be used for Fax.
Select the tray to be used for Print.
Select a specific tray you do not want to use; if it is
loaded with paper of the wrong size.
Select the tray that contains the paper used as the
separator paper, which is inserted between each
print job.
Adjust the ring volume.
Adjust the beeper volume.
Adjust the speaker volume.
Adjust the brightness of the LCD backlight.
Set how long the LCD backlight stays on after you
go back to your Home screen.
Set the default Home screen settings.
Set the default Copy screen settings.
Set the default Scan screen settings.
Set the default display information settings.
Increase the page yield of the toner cartridge.
Set how much time will pass before the machine
enters Power Saving Mode.
Decrease printing noise.
Set the number of hours that the machine will
remain in Deep Sleep Mode before going into
Power Off Mode.
Restrict unauthorised users from changing the
machine's settings.
Enable or disable the Fixed Port function.
Delete the registered Macro data.
Delete the registered Font data.
Restore the Macro and Font data of your machine to
the default settings.
603