Fuji Xerox DocuPrint M385 z User Manual page 360

Home > Network > Advanced Network Features
Enable Receive Notification for TX Verification Mail
Enable Receive Notification for TX Verification Mail
Related Models: DocuPrint M385 z/DocuPrint M375 z
1. Press [ ] [Settings] > [All Settings] > [Network] > [E-mail/IFAX] > [Setup Mail RX] >
[Notification].
2. Press one of the three possible settings:
Option
Receive Notification
On
Receive Notification
MDN
Receive Notification
Off
• To send TX Verification Mail, the Sender must configure these settings:
- Switch [Notification] in [Setup Mail TX] to [On].
- Switch [Header] in [Setup Mail RX] to [All] or [Subject+From+To].
• To receive TX Verification Mail, the Receiver must configure these settings:
- Switch [Notification] in [Setup Mail RX] to [On].
3. Press .
Related Information
• Internet Fax (I-Fax) Verification Mail
Description
When Receive Notification is On, a template is sent back to the sender to indicate
successful reception and processing of the message.
These templates depend on the operation requested by the sender.
Example:
SUCCESS: Received From <Mail Address>
When Receive Notification is MDN, a report to indicate successful reception and processing
is sent back to the sender if the originating station sent a request confirmation to the MDN
(Message Disposition Notification) field.
When Receive Notification is Off, all forms of receive notification are disabled and no
message is sent back to the sender regardless of the request.
> I-Fax Options > Internet Fax (I-Fax) Verification Mail >
360