Message Playback Settings; Set Remote Access Code - VTech IS8128 User Manual

Message playback settings

If you have new messages, the telephone
plays only the new messages (oldest
first). If there are no new messages,
the telephone plays back all messages
(oldest first).
When playback begins, you hear the
total number of messages followed
by the date and time of the message.
After the last message, the telephone
announces, "End of
NOTE
• Make sure you
correctly.
messages."
Set date and time

Set remote access code

You can set your own remote access
code from 00 to 99.
To change the remote access code:
Using a cordless handset or telephone
base:
MENU/SELECT
1. Press
phone is not in use.
2. Press q CID or p
Answering sys, and then press
MENU/SELECT.
3. Press q CID or p
Ans sys setup, and then press
MENU/SELECT.
4. Press q CID or p
Remote code,
MENU/SELECT.
5. Use the dialing keys to enter a two-
digit number.
-OR-
Press q CID or p
desired two-digit number.
6. Press MENU/SELECT to confirm.
111
when the
to choose
to choose
to highlight
then press
to scroll to a