Table of Contents
Advertisement
Answering system
Message playback
If you have new messages, the telephone plays only the new messages
(oldest first). If there are no new messages, the telephone plays all messages
(oldest first). If you have no messages, the cordless handset or telephone base
announces, "You have no message." and displays You have: No message.
When playback begins, you hear the total number of messages followed by
the date and time of the message (see Set date/time on pages 37 and 47 for
setting day and time). After the last message, the telephone announces, "End
of messages." and the cordless handset or telephone base displays
End of messages. If the recording time is less than three minutes, you hear,
"Less than three minutes to record." (See Message capacity on page 118).
To listen to messages with a cordless handset:
Press the MENU softkey in idle mode.
1.
Press the SELECT softkey to select PLAY MESSAGES.
2.
3.
Press
or
SELECT softkey.
4.
If there are new and old messages, the handset announces the number
of new and old messages and the screen displays the number of new
and old messages recorded. Press
Play old msgs, then press the SELECT softkey. The screen displays the
message status and 3:Delete.
Options during playback:
Press EQ
•
Press /VOL or VOL/ to adjust the speakerphone volume.
•
•
Press the SKIP softkey to skip to the next message.
Press the REPEAT softkey to repeat the message currently playing.
•
Press the REPEAT softkey twice to listen to the previous message.
Press 3 to delete the current message. The system advances to the
•
next message.
OFF/
•
Press
to select Mailbox 1 or Mailbox 2, then press the
to adjust the message playback audio quality.
to stop.
CLEAR
to select Play new msgs or
or
120
Advertisement
Table of Contents
