Structure Of The Devices; Views Of The Device - Siemens SIMATIC IPC277G PRO Operating Instructions Manual

COM (optional)
•
USB (external)
•
USB (internal)
•
DisplayPort
•
•
Keyboard, mouse Connection through USB port
Operating systems
Operation Systems
•
•
Only one adapter plate on housing.
1
The 240G/480G SSD has the Power loss protection (PLP). These configurations are not released in the
2
current version. For the detailed configuration, refer to Technical data (Page 95).
In the BIOS setup, you can configure support of RS232/RS422/RS485 for each COM port.
3
DP++ is a DisplayPort Dual-Mode, and it supports HDMI/DP signal output.
4
MUI: Multi-language user interface; More language packages are available on the USB stick. You can install
5
them according to your request.
1.2

Structure of the devices

1.2.1

Views of the device

This section describes the design of 12", 15" and 19" multi-touch devices, using the 19"
device as an example.
Front view and side view
The front view on the left is the standard mounting position, side view on the right.
①
②
③
④
SIMATIC IPC277G PRO
Operating Instructions, 02/2022, A5E51373692-AA
1 × RS232/RS422/RS485
3
4 × USB 3.1 Gen2 (up to 10 Gb/s)
1 × USB pin header to 2 USB 2.0 ports
Connection of a digital monitor, support DisplayPort Standard Version 1.4
2 × DP++ , support resolution up to 4096 × 2160 pixels at 60 Hz
4
Without OS
Windows 10 Enterprise 2019 LTSC (Long Term Servicing Channel) 64-bit (MUI)
Display with multi-touch screen
Enclosure
Backplane cover
Terminal compartment cover
Overview
1.2 Structure of the devices
5
11