Siemens SIMATIC IPC277G PRO Operating Instructions Manual page 20

Safety instructions
2.1 General safety instructions
Note the following for system expansions:
• Only install system expansion devices designed for this device. Contact your technical
support team or where you purchased your PC to find out which system expansion devices
can safely be installed.
• Comply with the electromagnetic compatibility (Page 82) requirements.
Risk of fire through expansion cards
Expansion cards generate additional heat. The device might overheat and cause a fire.
Note the following:
• Observe the safety and installation instructions for the expansion cards.
• Install the device in an enclosure that meets the requirements of paragraph 9.3.2 of the
Battery
Risk of explosion and release of harmful substances
Improper handling of lithium batteries can result in an explosion of the batteries.
Explosion of the batteries and the released pollutants can cause severe physical injury. Worn
batteries jeopardize the function of the device.
Note the following when handling lithium batteries:
• Replace used batteries in good time; see the section "Replacing the backup battery
• Replace the lithium battery only with an identical battery or types recommended by
• For any requirements on product maintenance, contact Siemens Technical support
• Do not throw lithium batteries into fire, do not solder on the cell body, do not recharge,
20
WARNING
IEC/UL/EN/DIN-EN 61010-2-201 standard.
WARNING
(Page 68)" in the operating instructions.
SIEMENS (article number: A5E48370874).
(Page 115).
do not open, do not short-circuit, do not reverse polarity, do not heat above 100°C and
protect from direct sunlight, moisture and condensation.
Operating Instructions, 02/2022, A5E51373692-AA
SIMATIC IPC277G PRO