Toro Groundsmaster 3280-D Service Manual page 157

Removal (Fig. 9)
1. Park machine on a level surface, lower cutting deck
(or implement), stop engine, engage parking brake and
remove key from the ignition switch.
2. Remove seat and seat suspension from machine
(see Operator Seat in this section).
3. Remove mechanical seat suspension components
as needed using Figures 9 and 10 as guides.
Installation (Fig. 9)
1. Install mechanical seat suspension components us-
ing Figure 9 and 10 as guides.
2. Install seat and seat suspension to machine (see
Operator Seat in this section). Make sure to connect
electrical connector to the seat switch.
Groundsmaster 3280−D/3320
4
1. Suspension assembly
2. Mounting bracket
3. Cap screw (4 used)
Page 7 − 19
5
6
3
Figure 10
4. RH slide bracket
5. Lock nut (4 used)
6. LH slide bracket
Chassis
1
2