Table of Contents
Advertisement
Introduction
The Sweepmaster may only be operat-
ed, serviced and repaired by personnel
who are familiar with the work involved
and are aware of the risks. The applica-
ble accident prevention laws must be
observed and any generally accepted
health and safety directives must be
maintained.
Based on the conception, design and
construction of the model introduced
onto the market by us, the machine
complies with the applicable basic safe-
ty and health requirements stipulated in
the EC directives (refer to the Declara-
tion of Conformity). The EC Declaration
of Conformity is no longer considered
valid in the event of modifications to the
machine not authorized by us. The
manufacturer is not deemed liable for
any damage resulting from unauthor-
ized modifications to the machine.
Information on the warranty
As a fundamental rule, the regulations
in the purchase agreement apply.
There are no rights to claims for com-
pensation under the terms of warranty
when the damage is a result of failure to
observe the stipulations concerning
service and maintenance. Maintenance
work must be completed by an author-
ized Hako service center and confirmed
in the "maintenance logbook"; this
serves as proof of rights to claims under
the terms of warranty.
The following are excluded from the
terms of warranty: normal wear and tear
and damage caused by overuse, defec-
tive fuses, improper handling or unau-
thorized modifications. Claims under
the terms of warranty are also annulled
when damage occurs to the machine as
the result of the use of parts and acces-
sories not explicitly approved by us or to
failure to observe maintenance proce-
dures.
Handover of the machine
Inspect the machine immediately on
delivery for signs of transport damage.
Replacement will be made when confir-
mation is provided immediately by the
freight carrier with regard to the
damage and the damage report is sent
to our authorized sales partner together
with the consignment note.
3
Advertisement
Table of Contents
