HAKO Sweepmaster P800 Instruction Manual page 2

Introduction
Preface Introduction
Dear customer,
We hope that the excellent qualities of
the machine justify the faith you have
shown in us by purchasing the product.
Your safety, and that of others, is de-
pendent on your ability to control the
machine. Please read this original man-
ual before using the machine for the
first time, act according to the informa-
tion contained and keep it in a safe
place for future reference or subse-
quent owners. In order to ensure that
you can work with the machine safely,
please read the chapter on safety be-
fore starting it up.
The operating manual contains all the
important information you need to oper-
ate, maintain and service the machine.
Sections of this operating manual which
are relevant to safety are marked by the
hazard label. If you have any questions
with regard to the machine or operating
manual, you can contact your Hako ser-
vice partner at any time.
2
We would like to emphasize that no le-
gal claims can be asserted in respect of
any work described in this manual. En-
sure only original spare parts are used
should any repairs be necessary. Only
such original spare parts warrant that
the equipment is reliably ready to use at
all times. We reserve the right to make
technical improvements.
Valid from: April 2014
Hako GmbH
D-23843 Bad Oldesloe
Hamburger Straße 209-239
Telephone +49 4531 806-0
Intended use
The Sweepmaster is a manually operat-
ed sweeper for industrial/commercial
use and serves to clean up dry and wet
waste from indoor and outdoor areas
such as production plants, warehouses,
car parks, parking blocks, pedestrian
precincts, market squares, railway sta-
tions and filling stations. The Sweep-
master can clean all types of industrial
floor, concrete, asphalt and tar, paving
and interlocking stone paving. It is not
permitted for use on public roads with
motor traffic. The Sweepmaster B800
can be upgraded with a carpet kit so it
can also be used to clean dry waste
from carpets.
Any use beyond this is regarded as im-
proper use. The manufacturer is not
considered liable for any damage re-
sulting from improper use; the user is
solely responsible for all the risks.
Intended use also includes maintaining
and observing the operating, mainte-
nance and repair conditions prescribed
by the manufacturer.