Safety Regulations; Safety Assessment; Use Of Qualified Personnel - Pilz PSEN sl-1.0p 1.1 Operating Manual

PSEN sl-1.0p 1.1/1.1 VA

Safety regulations

Safety assessment

Before using a unit it is necessary to perform a safety assessment in accordance with the
Machinery Directive.
Functional safety is guaranteed for the product as a single component. However, this does
not guarantee the functional safety of the overall plant/machine. In order to achieve the re-
quired safety level for the overall plant/machine, define the safety requirements for the
plant/machine and then define how these must be implemented from a technical and organ-
isational standpoint.

Use of qualified personnel

The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is a qualified and knowledgeable person who, because of their train-
ing, experience and current professional activity, has the specialist knowledge required. To
be able to inspect, assess and operate devices, systems and machines, the person has to
be informed of the state of the art and the applicable national, European and international
laws, directives and standards.
It is the company's responsibility only to employ personnel who
Are familiar with the basic regulations concerning health and safety / accident preven-
}
tion,
Have read and understood the information provided in this description under "Safety"
}
Have a good knowledge of the generic and specialist standards applicable to the spe-
}
cific application.
Operating Manual PSEN sl-1.0p 1.1/1.1 VA
1003821-EN-12
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.
INFORMATION
The magnet surface and counterplate may heat up. When installing, make
sure that heat dissipation is guaranteed.
7