Installation - Pilz PSEN sl-1.0p 1.1 Operating Manual

PSEN sl-1.0p 1.1/1.1 VA

Installation

The safety gate system can be installed on left or right-hinged swing gates or on sliding
}
gates.
Safety switches and actuators must be positioned so that they are secured against a
}
change of position.
Also note the max. angular offset (see Technical details:
}
actuator [
tuator and stainless steel base plate [
The access to the safety switch and actuator has to be possible for maintenance and
}
checking the correct operation.
Use reliable fastening elements. A tool is to be required to loosen the fastening ele-
}
ments.
Prevent self-loosening of the fastening elements of safety switch and actuator.
}
The fastening of safety switch and actuator has to be sufficiently stable to ensure the
}
proper operation of the safety switch and the actuator.
Prevent the safety switch and actuator being exposed to heavy shock or vibration
}
Circumvention of the safety switch in a reasonably foreseeable manner must be pre-
}
vented.
Operating Manual PSEN sl-1.0p 1.1/1.1 VA
1003821-EN-12
WARNING!
Potential loss of safety function due to gross manipulation
Depending on the application, serious injury or death may result.
Use appropriate installation measures to prevent
– The wiring being modified.
– A short circuit being generated on the connector.
– The possibility of using a second actuator to open the safety gate.
CAUTION!
The unit's properties may be affected if installed in an environment contain-
ing electrically or magnetically conductive material. Please check the oper-
ating distances and the assured release distance.
27], System with free-moving actuator [
System with normal
30], System with normal ac-
34]).
18