Auto Id Commission Tool; Auto Id Setting - Delta M70A-262 Operation And Installation Manual

4.2 Auto ID Commission Tool

The Auto ID function could set all inverter IDs at monitoring center after wiring RS-485.
Please download the software from the following website:
https://mydeltasolar.deltaww.com/dl_installer_guide.php?f=autoid

4.2.1 Auto ID Setting

1
ATTENTION
Open the software
1. Select COM Port and click
2. Enter the number of Inverters and press
2
3. Show the inverter serial number and ID,
YES
Figure 4-2: Steps of auto ID setting by tool
and the status display OK is completed.
49
Commissioning