Commissioning
4.2 Auto ID Commission Tool
The Auto ID function could set all inverter IDs at monitoring center after wiring RS-485.
Please download the software from the following website:
https://mydeltasolar.deltaww.com/dl_installer_guide.php?f=autoid
4.2.1 Auto ID Setting
1
2
YES
Figure 4-2: Steps of auto ID setting by tool
ATTENTION
Open the software
1. Select COM Port and click
2. Enter the number of Inverters and press
3. Show the inverter serial number and ID,
and the status display OK is completed.
42