Antenna - Delta M70A-262 Operation And Installation Manual

Installation

3.6 Antenna

There is an antenna for SUB_1G, it must be installed with 1.2 N
installation notice included antenna and bracket are shown in Figure 3-19 ~ 3-21.
- Always keep nut and screws properly tightened on the case.
Water leakage may cause serious damage.
Contact DELTA service when lack for nut and screws.
- Store the nut for spare usage.
Antenna
Location
Save the nut after
antenna installed.
Remove the nut.
ATTENTION
Use the wrench to lock antenna with 1.2 N•m torque.
Figure 3-19: Installation of antenna
38
m and some
•
13mm Open end wrench