Installation
3.6 SUB_1G Antenna (optional)
There is an antenna for SUB_1G, it must be installed with 1.2 N
installation notice included antenna and bracket are shown in Figure 3-20 ~ 3-22.
- Always keep nut and screws properly tightened on the case.
Water leakage may cause serious damage.
Contact DELTA service when lack for nut and screws.
- Store the nut for spare usage.
Antenna
Location
Save the nut after
antenna installed.
Remove the nut.
ATTENTION
Use the wrench to lock antenna with 1.2 N•m torque.
Figure 3-20: Installation of antenna
38
m and some
•
13mm Open end wrench