Table of Contents
Advertisement
Installation
3.6 SUB_1G Antenna (optional)
Please follow Figure 3-20 to 3-22 to install the SUB_1G antenna.
- If the antenna and bracket are not installing on the case, ensure the nut and
screws are properly tightened for the great Ingress protection.
Antenna
Location
Save the nut after
antenna installed.
Remove the nut.
ATTENTION
Use the wrench to lock antenna with 1.2 N•m torque.
Figure 3-20: Installation of antenna
38
13mm Open end wrench
Advertisement
Chapters
Table of Contents
