Polycom MGC-25 Getting Started Manual page 83

determined by the maximum number of participants in a conference
supported by the MCU, or by the availability of the MCU resources.
9. Click the Meet Me Per Conf tab.
The Properties - Meet Me Per Conf dialog box opens.
10. Select the Limited Sequences check box, to limit the number of times
that the Meeting Room can be activated. If this check box is cleared, the
Meeting Room can be activated an unlimited number of times.
11. In the Number of Occurrences field, determine the number of times the
Meeting Room can be activated: 1 means that the conference can be
activated once, and then it will be deleted from the system. 2 or more
means that the conference can be activated that number of times, and the
conference remains in sleep mode in between recurrences.
12. In the Meet Me ISDN Service pane, click the Plus (+) button to define
dial-in numbers for this conference. If you do not define a dial-in
number, the system will assign a dial-in number from the range of dial-in
numbers defined in the Network Service. The dial-in number appears in
the Status pane of the MGC Manager screen.
Chapter 6 - Defining a New Audio Conference
6-11