Polycom MGC-25 Getting Started Manual page 105

Table 8-3: System Configuration (Continued)
Field
IP - Max IP
Participants
according to rates
ISDN - Max ISDN
Participants
according to rates
Attributes
Dongle
Hardware CP
Chapter 8 - MGC-25 Management Tools
Description
The total number of participants that can connect to
the system per connection rate. Each row represents
total system capacity. For example, according to the
picture above, if 16 VOIP (64 Kbps) participants were
to connect to the system simultaneously, they would
be using the entire system capacity.
The total number of participants that can connect to
the system per connection rate. Each row represents
total system capacity. For example, according to the
picture above, if 24 PSTN (64 Kbps) participants
were to connect to the system simultaneously, they
would be using the entire system capacity.
Note: ISDN capacities are calculated using E1 (1920
Kbps) as the basis for network capacity. If your
system is connected via T1 (1536 Kbps), the
capacities may be less.
This area indicates the general attributes of the
system configuration.
The Dongle Serial Number is a unique numeric
identifier for the dongle installed in the system. The
other values in this area display version information
for Polycom support personnel.
The number of ports available on the Video card for
Continuous Presence participants or for Conferences
On Port.
8-9