Viewing Module Parameters - Polycom MGC-25 Getting Started Manual

Viewing Module Parameters

You may want to view the card parameters, disable one or more of the card's
units, or modify the card configuration.
To view any card parameters:
Right-click the slot containing the card to check or configure, and then
•
click Properties.
The Card Settings – Common Parameters dialog box opens.
This dialog box appears in the properties of all Functional Modules. It
contains fields common to all the cards.
The system indicates the physical slot in which the card is inserted, the
card's type, hardware version and serial number as identified by the
MCU's software.
Chapter 8 - MGC-25 Management Tools
8-15