Locking And Unlocking A Conference - Polycom MGC-25 Getting Started Manual

MGC-25 Getting Started Guide

Locking and Unlocking a Conference

5-20
To mute a participant using MGC Manager:
In the Monitor or the Status pane, right-click the participant icon, and
•
then click Mute Audio to mute the audio signal, or click Mute Video on
to mute the video signal. Alternatively, click the Participant icon and
then click the Mute Audio button or Mute Video button on the
Participant Toolbar.
The menu changes to UnMute Audio, or UnMute Video (respectively).
The appropriate Audio
Video columns of the Monitor and Status panes.
For information about additional muting options, refer to the MGC
Manager User's Guide, Volume I, Chapter 6.
You can lock or unlock On Going Conferences and thus control access of
dial-in participants to these conferences. The Lock/Unlock option is dynamic
and can be applied any time before or during the conference. This feature is
used to:
Limit the number of dial-in participants connecting to the conference in
•
order to save resources.
Prevent other participants from connecting to the conference once all the
•
required participants have already been connected.
To Lock or Unlock a conference:
• Right-click the conference icon, and then click Lock Conference or
Unlock Conference.
Alternatively, click the Conference icon, and then click the Lock button
or Unlock button on the Conference Toolbar.
or Video icon appears in the Audio or