Starting The Mgc Manager - Polycom MGC-25 Getting Started Manual

MGC-25 Getting Started Guide

Starting the MGC Manager

Initial IP
Configuration
Installing the
MGC Manager
Starting the MGC
Manager
Defining an MCU
Connecting
to an MCU
Configuring the
Network Services
3-6
The MGC Manager can connect to several MGC units simultaneously. The
first time you run the MGC Manager application, or when a new MCU is
added to your configuration, you must first define each MCU's IP address and
listening port number.
The MGC unit has to be installed and its IP address properly configured
before defining its connection parameters in the MGC Manager
application. For details, see "Initial IP Configuration" on page 3-1 in this
guide.
To define an MGC connection:
On the Start - Programs menu, click MGC Manager ver 7.5, and then
•
click MGC Manager ver 7.5 to start the application.
The MGC Manager main window opens.
Main Menu
Toolbars
Status pane
Browser
pane
Monitor pane