Mcu Card Management - Polycom MGC-25 Getting Started Manual

MGC-25 Getting Started Guide

MCU Card Management

8-10
This section describes how to manage the MCU modules. In particular, the
chapter describes the following tasks:
Listing the installed modules
•
Viewing the module parameters
•
Listing the cards units and options
•
• MCU Faults Report
• Reset an MCU
Obtaining Additional Information
•
The MCU must be connected in order to perform the above tasks. For details,
see Chapter 3, "Connecting to an MCU" on page 3-8.
The MGC-25 can contain several functional module cards. Each module is
automatically identified by the system, as well as the versions of the programs
embedded in it. These parameters can be viewed in the card Properties - Card
Settings dialog box.
Table 9-4 lists the available functional modules.
Table 8-4: MGC Functional Modules
Functional
Function
Module
NET2 Network Interfaces between the MGC unit and the ISDN or T1 CAS
Interface Module network.
IP Network Interfaces between the MGC unit and the LAN network.
Interface Module
MUX+ Module Multiplexes and demultiplexes audio and data information.
It performs channel aggregation (inverse multiplexing) and
video processing in Video Switching conferences.
AUDIO7 Module Performs audio compression, decompression, bridging
and DTMF tones.
VIDEO6 Module Optional, depending on configuration. Performs video
compression and decompression.