Important Notes - Quick BTR Series Installation And User Manual

2 - Supply and equipment
EN
2.0 - Standard supply and material included in the package
• Retractable thruster
• O-ring
• Hinge
• Hatch bracket
• Steel wire rope
• Installation and user's manual
• Warranty conditions
2.1 - Tools required for installation
BTR 140 • Phillips screwdriver
• Wire cutters
• Drill and drill bit Ø 8.5 mm
• Allen wrench: 2.5 mm
• Fork wrench: 8 mm and 13 mm
BTR 185 • Phillips screwdriver
• Wire cutters
• Drill and drill bit Ø 8.5 mm
• Allen wrench: 2.5 mm
• Fork wrench: 8 mm and 13 mm
BTR 250 • Phillips screwdriver
• Wire cutters
• Drill and drill bit Ø 8.5 mm
• Allen wrench: 2.5 mm and 10 mm
• Fork wrench: 8 mm, 13 mm and 17 mm
BTR 300 • Phillips screwdriver
• Wire cutters
• Drill and drill bit Ø 8.5 mm
• Allen wrench: 2.5 mm and 10 mm
• Fork wrench: 8 mm, 13 mm and 17 mm
2.2 - Recommended Quick
• TCD thruster controls
• TSC integrated line switch control
• TMS line switch
• PSS parallel battery switch
• TFH Fuse holder
3 - Introduction
BEFORE USING THE PRODUCT, PLEASE READ THIS USER'S MANUAL CAREFULLY. IF IN DOUBT, PLEASE CONSULT YOUR QUICK® DEALER.

3.0 - Important notes

This manual features Warning and/or Caution symbols that are important for safety.
Please follow the instructions provided.
This manual provides boat manufacturers and nautical equipment installers with instructions on how to assemble the specified
Quick® product and operate it
6
accessories not included
®
Warning symbol indicating
dangerous situations.
correctly.
QUICK BTR Series INSTALLATION AND USER'S MANUAL - REV 001C
Caution symbol to prevent direct or
indirect damage to the product.
BTR Series
BTR Series