TROUBLESHOOTING
Problem
Light on, but motor
does not work
Both light andmotor
do notwork
Oil leakage
Vibration
Insu cient suction
The machine inclines
Possible reason
The blades are blocked.
●
The capacitor is damaged.
●
The motor is damaged.
●
The internal wiring of motor
●
is cut o /disconnected. An
unpleasant smell may be
produced.
Apart from the above mentioned, check the following:
Light damaged.
●
Power cord loose.
●
Outlet and the air ventilation
●
entrance are not tightly
sealed.
The blade, if damaged, can
●
cause vibrating.
The motor is not tightly
●
fastened.
The cooker hood is not tightly
●
fixed.
The distance between the
●
cooker hood and the cooker top
is too large.
Too much ventilation from
●
open doors or windows.
The fixing screws are not tight
●
enough.
The hanging screws are not
●
tight enough
Solution
Check the blades
Replace capacitor.
Replace motor.
Replace motor.
Replace lights.
Connect the wires as the
electric diagram.
Take down the outlet and seal
with glue.
Replace the blade.
Fasten the motor tightly.
Fixed the cooker hood tightly.
Readjust the distance.
Choose a new place to install
the appliance or close some
doors / windows.
Tighten the fixing screw and
make it horizontal.
Tighten the hanging screw
and make it horizontal.
12