Troubleshooting - Midea WHK 7.62 BL User Manual

TROUBLE SHOOTING
Fault
Light on, but
motor does
not work
Both light and
motor do not
work
Oil leakage
Vibration
Insufficient
suction
The machine
inclines
Cause
The blades are blocked.
The capacitor is damaged.
The motor is damaged.
The internal wiring of motor is
cut off/ disconnected. An
unpleasant smell
may be produced.
Apart from the above mentioned, check the following:
Light damaged.
Power cord loose.
Outlet and the air ventilation
entrance are not tightly sealed.
Leakage from the connection
of U-shaped section and cover.
The blade, if damaged, can
cause vibrating.
The motor is not tightly
fastened.
The cooker hood is not tightly
fixed.
The distance between the
cooker hood and the cooker
top is too large.
Too much ventilation from
open doors or windows.
The fixing screws are not tight
enough.
The hanging screws are not
tight enough
Replace capacitor.
Replace motor.
Replace motor.
Replace lights.
Connect the wires as per the
electric diagram.
Take down the outlet and seal with
glue.
Take U-shaped section down and
seal with soap or paint.
Replace the blade.
Fasten the motor tightly.
Fixed the cooker hood tightly.
Readjust the distance.
Choose a new place to install the
appliance or close some doors /
windows.
Tighten the fixing screw and make
it horizontal.
Tighten the hanging screw and
make it horizontal.
12
Solution
DE
EN