Bearing Pulse Output Adjustment (Output Pulse) - JRC JMA-5204 Instruction Manual

7.3.4 Bearing Pulse Output Adjustment (Output Pulse)

Set the output value of bearing pulse. This radar can set the output value to 2048 pulses and 4096 pulses.
This setting is allowed only when a 25 kw antenna is used.
Procedure 1
2
3
4
5
6
Exit 1
Hold down [RADAR MENU] key.
The Code Input Menu will appear.
Press [0] key.
Move the cursor onto the "ENT" button
in the Code Input menu, and press
[ENT] key.
The Adjust Menu will appear.
Press [4] key.
The TXRX Setting Menu will appear.
Press [7] key.
Select a set value to be used.
Press [RADAR MENU] key.
The Main Menu will reappear.
35