JRC JMA-5204 Instruction Manual page 156

Creating the automatic acquisition and AIS activation Zone
Procedure 1
2
3
4
5
Press the [TT Menu] key.
TT Menu opens.
Press the [5] key.
Press the [1] key.
Acquisition / activation zone setting menu (AZ)
opens.
Press the [3] or [4] key.
The range setting of the acquisition / activation
zone 1 (AZ1) or acquisition / activation zone 2
(AZ2) will be started.
Set the starting azimuth and range by
turning the [EBL] dial and
[VRM] dial, and press the [ENT] key.
Set the ending azimuth and range by turning the [EBL] dial and
[VRM] dial, and press the [ENT] key.
The acquisition / activation zone will be determined.
3 67