JRC JMA-5204 Instruction Manual page 185

3.8 DISPLAY NAVIGATION INFORMATION (NEW INFORMATION DISPLAY)
[IV] Saving navigation information (Save User Map)
This function is available only when navigation equipment is connected with the system or the own ship's
position is entered in manual mode.
Procedure 1 Press [4] key while the User Map
Setting Menu is open.
2 Press [2] key.
The Save User Map Menu will appear.
* Each time you press [1] key, the Device item is switched between
INTERNAL and CARD2.
INTERNAL: Saves data in the processor.
CARD2: Saves data in CARD2.
To select CARD2, insert the flash memory card, in which data has
been saved, into card slot 2 (upper stage).
3 Select the number of the file to be
saved, pressing the numeric key.
The Name Input Menu will appear.
4 Use the trackball to select an
alphabetic character A-Z or 0-9 shown
in the menu and press [ENT] key on
your required characters.
A maximum of 8 characters can be entered.
5 Repeat step 4 until the file name to be
saved is created, move the cursor to
ENT , and press [ENT] key.
The currently displayed navigation information
will be saved.
3 96
3