JRC JMA-5204 Instruction Manual page 386

7
8
9
10 Input an MBS Level setting value such that the main bang image remains
11 Press [2] key.
12 Input an MBS area setting value such that the suppression area and the
Exit 1
Press [2] key.
The numeric keypad to be used in MBS Area Menu will appear.
Input "20" as an MBS Area setting value.
The value can also be entered with the multi-dial.
Press [ENT] key after inputting the value.
Input [1] key.
The numeric keypad to be used in MBS Level Menu will appear.
lightly on the display.
The value can also be entered with the multi-dial.
Press [ENT] key after inputting the value.
The numeric keypad to be used in MBS Area Menu will appear.
main bang image completely overlap with each other.
The value can also be entered with the multi-dial.
Press [ENT] key after inputting the value.
Press [RADAR MENU] key.
The Main Menu will reappear.
47