How The Scanner Button Works - Microtek XT7000 HS User Manual

4. To define another custom function button if desired, follow steps 2 through
5. When done, click the OK button to exit the Scanner Button Settings
NOTE:
1. When you have finished the settings for the function buttons in the interface,
2. If ScanWizard DI is launched and the Main interface (AP control panel) is

How the Scanner Button Works

When you finish customizing the function buttons, follow the steps below to
perform the scanning task by pressing the function button on the scanner. The
scan will be performed in accordance with the designated button function using
the parameters configured in the Scanner Button Settings interface.
1. Place the document to be scanned facing down on the scanner's glass
2. Exit the Scanner Button Settings interface.
3. Press the Scan button on your scanner to activate the function associated
4. If necessary, specify new settings for each button. Follow the procedures
44 XT7000 HS Scanner User's Manual
3 of this sectioin.
Interface.
you have to exit interface before you perform the predefined scanning task
by pressing the buttons on the scanner.
activated on the screen, the scanned image files will appear in the Thumbnail
View window for your viewing after you perform the scanning task by
pressing the buttons on the scanner.
surface.
with the Scan button easily. Press the button again to cancel the ongoing
scanning task if needed.
When done, the scanned images will be automatically saved into an assigned
folder in the "Scanner Button" panel.
(steps 1 through 5) for the "Customizing the Scanner Buttons" section to
specify your new requirements for the buttons that you wish to redefine.