Step 2: Installing The Software - Microtek XT7000 HS User Manual

Step 2: Installing the Software

Important: Do not remove the yellow sticker from your scanner until you are told
to do so. You must install all software before connecting your scanner.
Always close any open programs and turn off Anti-virus utilities before installing
software.
1. Turn on your computer.
2. Place the Microtek Software CD/DVD
3. Follow the on-screen instructions to
4. Click EXIT on the Microtek Software Installer screen when all the software
5. Restart your computer.
Drivers & Software Upgrades
After you finish the installation of software, if you found that the installed drivers and software
cannot run your product or your computer system properly later, please go to the Microtek
Download Service site at microtek.com/en/download to download and install any updates you may
require.
For additional information about Microtek products, please visit our website at www.microtek.com.
12 XT7000 HS Scanner User's Manual
into a drive.
install the driver and software.
NOTE: If the Microtek Software Installer
screen does not come up automatically,
double-click the following in succession:
"My Computer"; the CD/DVD-ROM icon;
then cdsetup.exe to start the installer
program.
has been installed.